Sumisansui Mark Ⅲ - 100m Roll
Sumisansui Mark Ⅲ - 100m Roll
| Product Code: | SK1016 |
| Availability: | In Stock |
-
$230.00
- Ex Tax: $200.00
The MarkⅢ with “Over 45 degrees” spray angle nicely irrigates small to middle height crops.
- “Over 45 degrees” spray angle is usable for middle height crops.
- It irrigates 2.5 meters to both sides from the irrigation tube at 0.08 MPa in a windless condition.
- Irrigation performance is highly uniform from the beginning of the tube up to 100 meters.
- Made of special black polyethylene with high durability against sunlight.
- The light weight & compact product isn't only for professional farming but also for hobby gardens.
Use
- All kinds of open field crops from seeding to young plant stage
- Low to middle height crops such as leaf vegetables and root vegetables
- Turfs such as sport grounds and gardens
Precaution
- Lay down the irrigation tube flatly.
- Operate irrigation under appropriate pressure.
- Install a filtration system to prevent spray holes from clogging.
- Filter recommendation: Over 80 mesh
Specification
Material Polyethylene Product of Origin Japan Length (meter/roll) 100 Tube width (in mm, flattened) 50 Tube diameter (mmφ) 28 Recommended filtration (#mesh) 80 Type of fittings M Irrigation performance and water flow rate per pressure
Operation pressure (MPa) 0.08 0.04 Coverage: Max. Length (m) 100 100 Coverage: Width (m) 5 4.8 Recommended tube Interval for placing multiple tubes (m) 4.0 3.8 Average precipitation rate (mm/h) 6.6 5.9 Average flow rate (Litter/min·m) 0.55 0.38 Flow rate at 20m (Litter/min·m) 0.59 0.41 Flow rate at 40m (Litter/min·m) 0.59 0.40 Flow rate at 60m (Litter/min·m) 0.55 0.38 Flow rate at 80m (Litter/min·m) 0.52 0.36 Flow rate at 100m (Litter/min·m) 0.49 0.34